Largest Collection of Interview Questions
C# Interview Questions Answers
1. How is the DLL Hell problem solved in .NET?
Assembly versioning allows the application to specify not only the library it needs to run (which was available under Win32), but also the version of the assembly.
2. What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.
3. What is a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application separately from the localized modules, the localized assemblies that modify the core application are called satellite assemblies.
C Sharp Questions on Assemblies, DLL
Assembly versioning allows the application to specify not only the library it needs to run (which was available under Win32), but also the version of the assembly.
2. What are the ways to deploy an assembly?
An MSI installer, a CAB archive, and XCOPY command.
3. What is a satellite assembly?
When you write a multilingual or multi-cultural application in .NET, and want to distribute the core application separately from the localized modules, the localized assemblies that modify the core application are called satellite assemblies.
What do you know about .NET assemblies?
Assemblies are the smallest units of versioning and deployment in the .NET application. Assemblies are also the building blocks for programs such as Web services, Windows services, serviced components, and .NET remoting applications.
What’s the difference between private and shared assembly?
Private assembly is used inside an application only and does not have to be identified by a strong name. Shared assembly can be used by multiple applications and has to have a strong name.
What’s a strong name?
A strong name includes the name of the assembly, version number, culture identity, and a public key token.
Assemblies are the smallest units of versioning and deployment in the .NET application. Assemblies are also the building blocks for programs such as Web services, Windows services, serviced components, and .NET remoting applications.
What’s the difference between private and shared assembly?
Private assembly is used inside an application only and does not have to be identified by a strong name. Shared assembly can be used by multiple applications and has to have a strong name.
What’s a strong name?
A strong name includes the name of the assembly, version number, culture identity, and a public key token.
Common HR Interview Questions Answers
1. Tell me about yourself?
I am down-to-earth, sweet, smart, creative, industrious, and thorough.
2. How has your experience prepared you for your career?Coursework:
Aside from the discipline and engineering foundation learning that I have gained from my courses, I think the design projects, reports, and presentations have prepared me most for my career.
Work Experience:
Through internships, I have gained self-esteem, confidence, and problem-solving skills. I also refined my technical writing and learned to prepare professional documents for clients.
Student Organizations:
By working on multiple projects for different student organizations while keeping up my grades, I’ve built time management and efficiency skills. Additionally, I’ve developed leadership, communication, and teamwork abilities.
Life Experience:
In general, life has taught me determination and the importance of maintaining my ethical standards.
3. Describe the ideal job.Ideally, I would like to work in a fun, warm environment with individuals working independently towards team goals or individual goals. I am not concerned about minor elements, such as dress codes, cubicles, and the level of formality. Most important to me is an atmosphere that fosters attention to quality, honesty, and integrity.
4. What type of supervisor have you found to be the best?I have been fortunate enough to work under wonderful supervisors who have provided limited supervision, while answering thoughtful questions and guiding learning. In my experience, the best supervisors give positive feedback and tactful criticism.
5. What do you plan to be doing in five years’ time?Taking the PE exam and serving in supervisory/leadership roles both at work and in professional/community organization(s).
6. What contributions could you make in this organization that would help you to stand out from other applicants?In previous internships, my industriousness and ability to teach myself have been valuable assets to the company. My self-teaching abilities will minimize overhead costs, and my industriousness at targeting needs without prompting will set me apart from others. Additionally, one thing that has always set me apart from my scientific/engineering peers are my broad interests and strong writing abilities. I am not your typical “left-brained” engineer, and with my broad talents, I am likely to provide diverse viewpoints.
7. What sort of criteria are you using to decide the organization you will work for?Most importantly, I am looking for a company that values quality, ethics, and teamwork. I would like to work for a company that hires overachievers.
8. What made you choose your major?My academic interests are broad, so I sought civil engineering to achieve a great balance of mathematics, chemistry, biology, physics, and writing
10 Mistakes Managers should not make during Job Interviews
Common Human Resource Interview with Answers
Latest HR Interview Questions 2011
13 Interview Questions to access Candidate's True qualities
Questions To Ask During HR Interviews
50 Most Common HR Interview Questions Answers
25 Tricky Questions in a HR Job Interview
I am down-to-earth, sweet, smart, creative, industrious, and thorough.
2. How has your experience prepared you for your career?Coursework:
Aside from the discipline and engineering foundation learning that I have gained from my courses, I think the design projects, reports, and presentations have prepared me most for my career.
Work Experience:
Through internships, I have gained self-esteem, confidence, and problem-solving skills. I also refined my technical writing and learned to prepare professional documents for clients.
Student Organizations:
By working on multiple projects for different student organizations while keeping up my grades, I’ve built time management and efficiency skills. Additionally, I’ve developed leadership, communication, and teamwork abilities.
Life Experience:
In general, life has taught me determination and the importance of maintaining my ethical standards.
3. Describe the ideal job.Ideally, I would like to work in a fun, warm environment with individuals working independently towards team goals or individual goals. I am not concerned about minor elements, such as dress codes, cubicles, and the level of formality. Most important to me is an atmosphere that fosters attention to quality, honesty, and integrity.
4. What type of supervisor have you found to be the best?I have been fortunate enough to work under wonderful supervisors who have provided limited supervision, while answering thoughtful questions and guiding learning. In my experience, the best supervisors give positive feedback and tactful criticism.
5. What do you plan to be doing in five years’ time?Taking the PE exam and serving in supervisory/leadership roles both at work and in professional/community organization(s).
6. What contributions could you make in this organization that would help you to stand out from other applicants?In previous internships, my industriousness and ability to teach myself have been valuable assets to the company. My self-teaching abilities will minimize overhead costs, and my industriousness at targeting needs without prompting will set me apart from others. Additionally, one thing that has always set me apart from my scientific/engineering peers are my broad interests and strong writing abilities. I am not your typical “left-brained” engineer, and with my broad talents, I am likely to provide diverse viewpoints.
7. What sort of criteria are you using to decide the organization you will work for?Most importantly, I am looking for a company that values quality, ethics, and teamwork. I would like to work for a company that hires overachievers.
8. What made you choose your major?My academic interests are broad, so I sought civil engineering to achieve a great balance of mathematics, chemistry, biology, physics, and writing
Siebel Interview Questions and Answers Collection
Largest
Collection of Siebel Interview Questions and Answers. If you have
landed on this page successfully, you are guaranteed to succeed in a
Siebel Interview in top companies.
| Siebel Interview Question | Siebel Certifications |
| Siebel Admin Tutorials | Siebel Troubleshooting |
| Siebel Best Practices | Siebel Tutorials |
Siebel Configuration Interview Question Answers
- Advanced Siebel Interview Questions and Answers
- Siebel General Question Answers
- Siebel Realtime Interview Question Answers
- Advanced Siebel Realtime Interview Question Answers - 2
- Advanced Siebel Realtime Interview Question Answers - 1
- Latest Siebel Interview Question Answers - 6
- Latest Siebel Interview Question Answers - 5
- Latest Siebel Interview Question Answers - 4
- Latest Siebel Interview Question Answers - 3
- Latest Siebel Interview Question Answers - 1
- Siebel Latest Interview Questions Answers
- Advanced Siebel Interview Questions And Answers
- Siebel Realtime Interview Questions with Answers
- Siebel Interview Questions and Answers
- Siebel CRM Interview Questions and Answers
- Interview Questions and Answers on Siebel, FAQs on Siebel Configurations
- Latest Siebel Interview Questions and Answers collected from Real Time Interview
- Basic Siebel Interview Question and Answers
- Siebel Tools Configuration Interview Questions,Answers
- Oracle Siebel Interview Frequently Asked Questions, Answers
- Siebel Assignment Manager Interview Questions and Answers
Siebel Workflow Question Answers
- Siebel Workflow Advanced Interview Questions and Answers
- Siebel Workflow Interview Questions
- Siebel CRM Workflow Interview Question Answers
Siebel Actuate Interview Questions
- Siebel Actuate Questions Answers
- Actuate Reports Interview Questions
- Siebel Actuate Interview Questions
- Question Answers on Siebel Actuate Reports
- Siebel Actuate Reports Interview Questions
Siebel EAI Interview Question Answers
- Siebel EAI Sample Interview Question Answers
- Siebel CRM EAI Interview Questions Answers
- Latest Siebel EAI Interview Question Answers
- Siebel EAI Interview Questions
Siebel EIM Interview Questions Answers
- Siebel EIM Interview Questions and Answers
- Siebel EIM Interview Questions Answers
- Siebel EIM Interview Questions and Answers
- Siebel EIM Interview Questions, Answers and Explanation.
Siebel Scripting Interview Questions
- Siebel Scripting Interview Questions
- Siebel Scripting Best Practices
- Siebel Scripting Interview Questions
Siebel Administration Interview Questions
- Siebel Server Admin Interview Questions and Answers
- Siebel Administration Interview Questions
- Siebel Admin Inteview Questions and Answers
- Siebel Administrator Interview Questions
Siebel Interview Questions Answers asked in Top Companies
- Delloitte Siebel CRM Interview Question and Answers
- Siebel Realtime Interview Question Answers in Top Companies
- Accenture Siebel Interview Questions
- Cap Gemini Siebel CRM Interview Question and Answers
- Accenture Siebel CRM Job Interview Questions and Answers
- Siebel Interview Questions asked in HP India
- Birlasoft Siebel CRM Interview Question and Answers
- Latest Siebel Interview Questions in IBM, HP, Accenture
- IBM Siebel Interview Questions and Answers
Siebel Application Deployment Manager Interview
Siebel Analytics/OBIEE Interview Questions Answers
- Siebel Analytics Certifications Examinations Questions and Answers
- Siebel Analytics Certification Multiple Choice Questions
- Siebel Analytics Interview Questions with Answers
- Siebel Analytics OBIEE Interview Questions
- Siebel Analytics Technical Interview Questions
- Siebel CRM Configuration Questions and Answers
- Siebel Analytics FAQs , Interview Questions
- IBM Siebel Analytics Interview Questions
- Siebel Analytics Realtime Interview Questions
Over 1000 Interview Questions on Peoplesoft
PeopleSoft HRMS Interview Questions
- PeopleSoft HRMS / HCM MCQ - Part 2
- PeopleSoft HRMS Interview Questions and Answers : Part 3
- PeopleSoft HRMS Interview Questions and Answers : Part 2
- PeopleSoft HRMS / HCM MCQ - Part 1
- PeopleSoft HRMS Interview Questions and Answers : Part 1
- PeopleSoft HRMS / HCM Interview Questions
- PeopleSoft HRMS / HCM Interview Questions Answers - Part 2
- PeopleSoft HRMS / HCM Interview Questions Answers - Part 1
- PeopleSoft Application Engine Interview Questions and Answers-1
- PeopleSoft Application Engine Interview Questions and Answers-2
- PeopleSoft Admin Interview Questions-1
- PeopleSoft Admin Interview Questions-2
- PeopleSoft Admin Interview Questions
PeopleSoft SQR
PeopleSoft Interview Questions
PeopleSoft Interview Questions and Answers
- Peoplesoft Realtime Interview Questions and Answers
- Frequently Asked PeopleSoft Technical Interview Questions and Answers
- Interview Questions and Answers on PeopleSoft
- Peoplesoft Interview Questions and Answers
- IBM Interview Questions Answers ,Solutions on PeopleSoft
- PeopleSoft Enterprise Applications Interview Questions and Answers
- PeopleSoft Enterprise Resource Planning Solutions Questions and Answers
- Peoplesoft FAQs and Answers collected from Job Interviews
- Important Interview Questions and Answers on Peoplesoft
- Peoplesoft Technical Interview Questions and Answers
- PeopleSoft Job Interview Questions and Answers
- Peoplesoft Generic Interview Questions and Answers
Previous Years Aptitude Questions from Reliance
1. Fox belongs to family of?
a) Wolf b) tiger c) Cat
2. Accident : Carefulness : : Disease : ?
a) Doctor b) medicine c) Sanitation
3. In one party there are wife and husband and their two sons with their
wives and each son have 4 children. How many are there in the party?
4. 4 ½ yard cloth costs 90 cents; what is the cost of 2 ½ yard cloth?
5. Ans. for one proverb: Don’t do that is impossible.
6. 10 boxes of apple weigh 400 pounds. Each empty box weighs 4 pounds. What is the weight of total apples?
7. Husbands are ---------- shorter than wives.
a) Never b) Usually c) Rarely d) Always e) Frequently f)Seldom
8. Fathers are -------------- wiser than sons.
a) Never b) Usually c) Rarely d) Always e) Frequently f)Seldom
9. Mothers are --------------older than their daughters.
a) Never b) Usually c) Rarely d) Always e) Frequently f) Seldom
10. Which number is odd one the series.
0 1 3 6 10 15 21 28 34
11. CONSTITUTIONAL write the word by inter changing 1st with 2nd , 3rd with 4th and 5th with 6th etc.
12. Opposite of Love --------- Hate.
13. Opposite of Hope --------- Despair.
14. Opposite of Honour --------- Disgrace.
15. Opposite of Love --------- Extravagant
16. Circle : Sphere : : Square : ?
a) cube b) hexagone c) triangle
17. Light : Candela : : Temp : Thermometer
18. Quite : Noise : : Sunlight : Darkness
19. Find out the odd word.
a) Shear b) Bend c) Shave d) Chop
20. Find out the odd word.
a) Good b) Red c) Walk d) Thick
21. Meaning of proverb : 1st bird catches warm fire.
22. All birds have -------------
a) Nest b) Wings c) Bill
23. All club members r republicans. Smith is not republican.
He is a club member is :
a) True b) False c) Un defined
24. 20” pipe is cut into 2 pieces . 2/3rd of it’s more than the other. Then what is
the length of smaller one?
25. Ans. For one proverb: Subordinates enjoy when their bosses r not
present.
26. Meaning of: “Dinner is judged by desserts”.
27. Moon :Earth : : Earth : ?
a) Sun b) Universe c) Star d) Jupiter
28. Trees always have
a) Leaves b) Branches c) Roots
29. Dinner always contains
a) Table b)Plates c)Food d) Hunger
30. 31`. 32. 3 Proverbs
33. 34. 35. Two statements true or false
36. 37. 38. Alphabets game
39. 40. 41. 42. 43. Simple calculations like 3 pencils cost is 30paise 10 pencils cost ?
Spl. Note: Don’t waste much time for alphabet game.
1. love----------- hate (opposite)
2. graceful---------awkward(opp)
3. honour---------disgrace
4. 1,4,9,25,36------------ans 108 (which is not perfect square)
5. 5 cents------3 pencils,then 50 cents-----------30 pencils
6. hypothetical means not firm meaning of sentences.
7. 14, 25, 36, 47, 59, 69 ans 59
8. temperature is measured ----------thermometer
9. quit: sound::darkness:sunlight
10. square:sphere ::cicle:sphere
11. plane:line:: line:point
12. 4.5 yard----90 cents then 2.5------ 50cents
13. all birds donot have------------ nest
14. one qu is related to cloth shrinkage ans 33 inch
15. series: l,m, n,o,p,q,r,s,t ans- n
16. a phrase child burnts by milk------------
17. one related to bridge prop------ans until u obstacle
18. pudding (ans food related)
19. phares mice plays when cat is away(find its ans by its meaning)
20. phares---early birds catches warms(its meaning is its ans)
21. one ques is related to family members whose ans is 12
22. 24 inches srinks to 20, then 36inches---------30
23. 1/4 sec run 6 feet, then in 10 sec –what ans 240
24. mother is always older than daughter
25. father is usually wiser than son
26. men are rarely shorter than wife
27. carefulness:accident::desease: doctor
28. meal should always involve ans food
29. how people recognize person ans characterstic
30. rotation: whirlpool::flying:wings
31. moon:earth:: earth :sun
32. never ----always(opp)
33. fox-----wolf
34. economical-----extravagent(opp)
35. electicity :candle::automobile :carriage
36. one ques how many no followed by n ans is 4
37. compromise------------
38. good,wall, red, thick ans is red
39. constitutional change the postion of first letter to sec, similarely third to fourth ,u will get ocsnitutitnola what is the twelthe letter ans is o
40. ordinary:exellent::few:many
41. thare are two ques which demands ans in cents ans is 120and 50 cents
42. why silver is more costlier than iron ans is rare
43. loyal :::: treacherous(opp)
44. 1,3,6,10,15,21,28,----- ans 36(series)
45. 2 parts of cream is made from 3 parts of milk then how much cream is made by 15 parts of milk ans-10
46. one ques demands ans in pounds ans is 360pounds
47. person away thinking -------conservative
48. A B Q PR S T -----A Q S Q L M ans –A
49. 2 , 5, 4, 3, 9, 0, 5, 9 WHICH LETTER COMES 2ND TIME FIRST ans 5
50. series (two series are there) missing term
4,2,5,3,6,4,7,5,--,6,9. ans---8
51. which of the following is thw exact mirror emage to the word
ans—OTTO
52 two statements are joined by ans—conjuction
53 series 1,3,9,27,81…….find the wrong no
54 last question has ans ….8
55 13,24,35,46, ans57
Read More
a) Wolf b) tiger c) Cat
2. Accident : Carefulness : : Disease : ?
a) Doctor b) medicine c) Sanitation
3. In one party there are wife and husband and their two sons with their
wives and each son have 4 children. How many are there in the party?
4. 4 ½ yard cloth costs 90 cents; what is the cost of 2 ½ yard cloth?
5. Ans. for one proverb: Don’t do that is impossible.
6. 10 boxes of apple weigh 400 pounds. Each empty box weighs 4 pounds. What is the weight of total apples?
7. Husbands are ---------- shorter than wives.
a) Never b) Usually c) Rarely d) Always e) Frequently f)Seldom
8. Fathers are -------------- wiser than sons.
a) Never b) Usually c) Rarely d) Always e) Frequently f)Seldom
9. Mothers are --------------older than their daughters.
a) Never b) Usually c) Rarely d) Always e) Frequently f) Seldom
10. Which number is odd one the series.
0 1 3 6 10 15 21 28 34
11. CONSTITUTIONAL write the word by inter changing 1st with 2nd , 3rd with 4th and 5th with 6th etc.
12. Opposite of Love --------- Hate.
13. Opposite of Hope --------- Despair.
14. Opposite of Honour --------- Disgrace.
15. Opposite of Love --------- Extravagant
16. Circle : Sphere : : Square : ?
a) cube b) hexagone c) triangle
17. Light : Candela : : Temp : Thermometer
18. Quite : Noise : : Sunlight : Darkness
19. Find out the odd word.
a) Shear b) Bend c) Shave d) Chop
20. Find out the odd word.
a) Good b) Red c) Walk d) Thick
21. Meaning of proverb : 1st bird catches warm fire.
22. All birds have -------------
a) Nest b) Wings c) Bill
23. All club members r republicans. Smith is not republican.
He is a club member is :
a) True b) False c) Un defined
24. 20” pipe is cut into 2 pieces . 2/3rd of it’s more than the other. Then what is
the length of smaller one?
25. Ans. For one proverb: Subordinates enjoy when their bosses r not
present.
26. Meaning of: “Dinner is judged by desserts”.
27. Moon :Earth : : Earth : ?
a) Sun b) Universe c) Star d) Jupiter
28. Trees always have
a) Leaves b) Branches c) Roots
29. Dinner always contains
a) Table b)Plates c)Food d) Hunger
30. 31`. 32. 3 Proverbs
33. 34. 35. Two statements true or false
36. 37. 38. Alphabets game
39. 40. 41. 42. 43. Simple calculations like 3 pencils cost is 30paise 10 pencils cost ?
Spl. Note: Don’t waste much time for alphabet game.
1. love----------- hate (opposite)
2. graceful---------awkward(opp)
3. honour---------disgrace
4. 1,4,9,25,36------------ans 108 (which is not perfect square)
5. 5 cents------3 pencils,then 50 cents-----------30 pencils
6. hypothetical means not firm meaning of sentences.
7. 14, 25, 36, 47, 59, 69 ans 59
8. temperature is measured ----------thermometer
9. quit: sound::darkness:sunlight
10. square:sphere ::cicle:sphere
11. plane:line:: line:point
12. 4.5 yard----90 cents then 2.5------ 50cents
13. all birds donot have------------ nest
14. one qu is related to cloth shrinkage ans 33 inch
15. series: l,m, n,o,p,q,r,s,t ans- n
16. a phrase child burnts by milk------------
17. one related to bridge prop------ans until u obstacle
18. pudding (ans food related)
19. phares mice plays when cat is away(find its ans by its meaning)
20. phares---early birds catches warms(its meaning is its ans)
21. one ques is related to family members whose ans is 12
22. 24 inches srinks to 20, then 36inches---------30
23. 1/4 sec run 6 feet, then in 10 sec –what ans 240
24. mother is always older than daughter
25. father is usually wiser than son
26. men are rarely shorter than wife
27. carefulness:accident::desease: doctor
28. meal should always involve ans food
29. how people recognize person ans characterstic
30. rotation: whirlpool::flying:wings
31. moon:earth:: earth :sun
32. never ----always(opp)
33. fox-----wolf
34. economical-----extravagent(opp)
35. electicity :candle::automobile :carriage
36. one ques how many no followed by n ans is 4
37. compromise------------
38. good,wall, red, thick ans is red
39. constitutional change the postion of first letter to sec, similarely third to fourth ,u will get ocsnitutitnola what is the twelthe letter ans is o
40. ordinary:exellent::few:many
41. thare are two ques which demands ans in cents ans is 120and 50 cents
42. why silver is more costlier than iron ans is rare
43. loyal :::: treacherous(opp)
44. 1,3,6,10,15,21,28,----- ans 36(series)
45. 2 parts of cream is made from 3 parts of milk then how much cream is made by 15 parts of milk ans-10
46. one ques demands ans in pounds ans is 360pounds
47. person away thinking -------conservative
48. A B Q PR S T -----A Q S Q L M ans –A
49. 2 , 5, 4, 3, 9, 0, 5, 9 WHICH LETTER COMES 2ND TIME FIRST ans 5
50. series (two series are there) missing term
4,2,5,3,6,4,7,5,--,6,9. ans---8
51. which of the following is thw exact mirror emage to the word
ans—OTTO
52 two statements are joined by ans—conjuction
53 series 1,3,9,27,81…….find the wrong no
54 last question has ans ….8
55 13,24,35,46, ans57
Campus Recruitment of Reliance Energy - 2009
Eligibility Criteria 10(60%) 12th (60%) CPI (6)
Branches allowed - Civil, Mechanical, Electronics, Electrical, Production
Selection procedure: Written test (45 mins)
GD (a panel of 10)
Interview (10- 15 mins)
Written test Questions (MCQs)
1. Which process imparts hardening
2.Kaplan turbine is which type of turbine
3. Coefficient of Performance(COP) of refrigerator and COP of heat are related
4. Laminar flow depends on
5. Topping Cycle efficiency and bottoming cycle efficiency are
6. Flow through pipe is maximum and minimum at
7. Classify turbines on the basis of heads(low, medium, high)
8. In Gas turbine which cycle is used
9. A numerical on velocity diagram
10.Find work done given nozzle angle and some other parameters
11.Which type of force acts in flange coupling and bolt when subjected to some situation (given in the prob)
12. A numerical where carnot cycle efficiency is given and higher temperature is given and asked to find the lower temperature
13.Torque and diameter are given and asked to find out shear stress
14.Blade angle, runner diameter, no. of revolutions given , Find absolute velocity
15.In a heat exchanger water will be hot and cold in outer or ineer shell - something like that
16.If wire insulation thickness varies what happens to conduction and convection
17.Relation between modulus of elasticity, bulk modulus and poision ratio.
18.How many inversions are possible with slider crank mechanisms
19.Corollis component of acceleration exists in which of the following mechanism
20.Data is given for discharge, power and something else and asked for which turbine it is suitable
21.How boiler are classified as primary, secondary on the basis of economizer, superheating, reheating etc
22.Al, Fe, water - in these how the thermal conductivity varies
23.There is a matching
Gas Turbine Brayton Cycle
Steam Power Plant Rankine cycle
two stroke engine marine cycle
24.Among the following which type of material is suitable for the Hot die Casting - Options :Ti, ......
25.When nut and bolt are tightened which forces will generate on bolt and tube
GD Topic
Child is the father of a man
Terrorism has no religion
Rational of Indian space adventure like Chandrayan
Interview Questions
1.They are asking about the Projects done
2.Questions are related to Steam Turbine, Francis Turbine, Reaction Turbine
3.What is penstock
4.How you design a blade for any turbine
5.Velocity diagrams of moving blade and stationary blade
6.Basic difference between Francis and Kaplan turbine
Read More
Branches allowed - Civil, Mechanical, Electronics, Electrical, Production
Selection procedure: Written test (45 mins)
GD (a panel of 10)
Interview (10- 15 mins)
Written test Questions (MCQs)
1. Which process imparts hardening
2.Kaplan turbine is which type of turbine
3. Coefficient of Performance(COP) of refrigerator and COP of heat are related
4. Laminar flow depends on
5. Topping Cycle efficiency and bottoming cycle efficiency are
6. Flow through pipe is maximum and minimum at
7. Classify turbines on the basis of heads(low, medium, high)
8. In Gas turbine which cycle is used
9. A numerical on velocity diagram
10.Find work done given nozzle angle and some other parameters
11.Which type of force acts in flange coupling and bolt when subjected to some situation (given in the prob)
12. A numerical where carnot cycle efficiency is given and higher temperature is given and asked to find the lower temperature
13.Torque and diameter are given and asked to find out shear stress
14.Blade angle, runner diameter, no. of revolutions given , Find absolute velocity
15.In a heat exchanger water will be hot and cold in outer or ineer shell - something like that
16.If wire insulation thickness varies what happens to conduction and convection
17.Relation between modulus of elasticity, bulk modulus and poision ratio.
18.How many inversions are possible with slider crank mechanisms
19.Corollis component of acceleration exists in which of the following mechanism
20.Data is given for discharge, power and something else and asked for which turbine it is suitable
21.How boiler are classified as primary, secondary on the basis of economizer, superheating, reheating etc
22.Al, Fe, water - in these how the thermal conductivity varies
23.There is a matching
Gas Turbine Brayton Cycle
Steam Power Plant Rankine cycle
two stroke engine marine cycle
24.Among the following which type of material is suitable for the Hot die Casting - Options :Ti, ......
25.When nut and bolt are tightened which forces will generate on bolt and tube
GD Topic
Child is the father of a man
Terrorism has no religion
Rational of Indian space adventure like Chandrayan
Interview Questions
1.They are asking about the Projects done
2.Questions are related to Steam Turbine, Francis Turbine, Reaction Turbine
3.What is penstock
4.How you design a blade for any turbine
5.Velocity diagrams of moving blade and stationary blade
6.Basic difference between Francis and Kaplan turbine
Campus Recruitment of MRPL - 2009
MRPL(Manglore Refinery and Petrochemicals Limited) - a subsidary of ONGC
Allowed branches: Mechanical, Electrical, Civil
Eligibility criteria: Top 15 students from GEN/OBC and CPI 6.5 for SC/ST
They have shortlisted the students accordingly for the interview
Interview Questions (Combined HR + Tech):
1.Tell me about urself, strengths, weaknesses, future plan, areas of interest
2.What is Zeroth law of thermodynamics
3.Expand BHN
4.Why heat treatment is done
5.What do you mean by hardness >> strength
6.Draw Rankine cycle
7.Explain all the processes in this Rankine cycle
8.What is sub cooling
9.What is Boiler Drum and where it will be in the boiler
10.What is otto cycle and where it is used
11.Where Rankine cycle is used
12.What is annealing and hardening
13.What is submerged welding
14.The delivery valve is closed in both the reciprocating and centrifugal pump, pressure gauges are fitted what happens when motor is on
15.What are the different types of welding
16.What is soldering
17.What is Thermite welding
18.What is reaction in thermite welding and what are the types of reactions
19.Basic difference between slotter machine and shaper machine
20.What is indexing and why it is used
21.Name the parts of Centrifugal pump and where is the suction valve placed in the casing
22.What is soldering and brazing
23.What is differential gear box
24.Define Octane number and Cetane number
Read More
Allowed branches: Mechanical, Electrical, Civil
Eligibility criteria: Top 15 students from GEN/OBC and CPI 6.5 for SC/ST
They have shortlisted the students accordingly for the interview
Interview Questions (Combined HR + Tech):
1.Tell me about urself, strengths, weaknesses, future plan, areas of interest
2.What is Zeroth law of thermodynamics
3.Expand BHN
4.Why heat treatment is done
5.What do you mean by hardness >> strength
6.Draw Rankine cycle
7.Explain all the processes in this Rankine cycle
8.What is sub cooling
9.What is Boiler Drum and where it will be in the boiler
10.What is otto cycle and where it is used
11.Where Rankine cycle is used
12.What is annealing and hardening
13.What is submerged welding
14.The delivery valve is closed in both the reciprocating and centrifugal pump, pressure gauges are fitted what happens when motor is on
15.What are the different types of welding
16.What is soldering
17.What is Thermite welding
18.What is reaction in thermite welding and what are the types of reactions
19.Basic difference between slotter machine and shaper machine
20.What is indexing and why it is used
21.Name the parts of Centrifugal pump and where is the suction valve placed in the casing
22.What is soldering and brazing
23.What is differential gear box
24.Define Octane number and Cetane number
Questions from Bajaj Campus Recruitment
1.What is the material of Crank Shaft? Standard time= a. normal time minus allowance b. reliability time.
2. Energy stored in the spring when it is fully compressed without any deformation is ——– Ans. Resilience or proof resilience
3. Question on the relation ?L=PL/AE. What is ? (strain)? Ans. P/AE
4.Lower spindle speed is necessary for? if diameter of w/p is large when depth of cut is high
5. For which of the following material machinability is high? Ans. Aluminium
6. 24 & 2 in M24X2 represent which of the following two parameters respectively?
7.What is the equation governing kinematic links and pairs?
a. L=2p-3 b. L=2p-4 c. L=3p-5]
8.Pick out the wrong statement:-
Joule cycle consists of 2 constant volume processes and 2 adiabatic processes
Otto cycle consists of 2 constant volume processes and 2 adiabatic processes
Ericsson cycle consists of 2 constant volume processes and 2 adiabatic processes
None of the above
For same compression ratio which of the following cycles is more efficient?
a. otto b. diesel
9.The angle between face of the tool and plane parallel to the base of the tool is
a. rake angle b. clearance angle c. cutting edge angle d. lip angle
10.Bevel gears are used for transmitting torque between
Intersecting & coplanar shafts
Non-intersecting & non-coplanar shafts
Non-parallel & non-coplanar shafts None of the above
11.Expansion process in Otto cycle lasts from TDC to BDC
30 degrees before TDC till 50 degrees before BDC
30 degrees after TDC till 50 degrees after BDC none of the above
12.Which type of thread is more effective for power transmission in one direction?
a. square b. acme c. buttress
13.The state of a liquid during evaporation is
a. vapour b. steam c. water vapour
14.Throttle valve is used in steam engines to
control pressure of steam
control volume of steam
control temperature of steam none of the above
Read More
2. Energy stored in the spring when it is fully compressed without any deformation is ——– Ans. Resilience or proof resilience
3. Question on the relation ?L=PL/AE. What is ? (strain)? Ans. P/AE
4.Lower spindle speed is necessary for? if diameter of w/p is large when depth of cut is high
5. For which of the following material machinability is high? Ans. Aluminium
6. 24 & 2 in M24X2 represent which of the following two parameters respectively?
7.What is the equation governing kinematic links and pairs?
a. L=2p-3 b. L=2p-4 c. L=3p-5]
8.Pick out the wrong statement:-
Joule cycle consists of 2 constant volume processes and 2 adiabatic processes
Otto cycle consists of 2 constant volume processes and 2 adiabatic processes
Ericsson cycle consists of 2 constant volume processes and 2 adiabatic processes
None of the above
For same compression ratio which of the following cycles is more efficient?
a. otto b. diesel
9.The angle between face of the tool and plane parallel to the base of the tool is
a. rake angle b. clearance angle c. cutting edge angle d. lip angle
10.Bevel gears are used for transmitting torque between
Intersecting & coplanar shafts
Non-intersecting & non-coplanar shafts
Non-parallel & non-coplanar shafts None of the above
11.Expansion process in Otto cycle lasts from TDC to BDC
30 degrees before TDC till 50 degrees before BDC
30 degrees after TDC till 50 degrees after BDC none of the above
12.Which type of thread is more effective for power transmission in one direction?
a. square b. acme c. buttress
13.The state of a liquid during evaporation is
a. vapour b. steam c. water vapour
14.Throttle valve is used in steam engines to
control pressure of steam
control volume of steam
control temperature of steam none of the above
Some more questions from BHEL - 2009
1. The ratio of two specific heats of air is equal to. = 1.41
2. A perfect gas at 270C is heated at constant pressure till its volume is double. The final temperature is = 3270C
3. An engine operates between temperature of 9000K and T2 and another engine between T2 and 8000K. For both to do equal work, value of T2 will be. = 6500K
4. Internal energy of a substance depends on = Temperature
5. Work done in compressing 1kg of gas adiabatically from p1,V1,T1 to p2, V2, T2 is equal to = Cv(T2-T1)
6. The unit of entropy is = J/kg 0K
7. Indicated power of a 4-stroke engine is equal to = pLAN/2
8. Which of the following is not an internal combustion engine :
a) 2 stroke petrol engine b) 4 stroke petrol engine c) Diesel engine d) steam engine e) Gas turbine. = (d)
9. If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the:
a) exhaust will be smoky b) piston rings would stick into piston grooves c) exhaust temperature will be high d) engine starts overheating e) all of the above. = (e)
10. The spark plug gap is normally maintained at: = 0.45 to 0.6mm
11. A distributor in spark ignition engines performs the function of : = Providing the correct firing order in engine
12. Which of the following does not relate to C.I. engine:: a) fuel pump b) fuel injector c) governor d) carburetor e) flywheel = (d)
13. Air fuel ratio in a jet engine is = 60:1
14. What is the value of Prandtl No.?
15. In domestic refrigerator, the tubes at the back of the refrigerator are: a) evaporator b) condenser c) capillary tubes d)………
16. Which refrigerants has the highest critical point temperature. = Freon-11
17. Wet bulb temperature is. = indication of amount of moisture in air
18. On psychometric chart, dry bulb temperature lines are. = Vertical
19. Surface tension has the units. = newtons/m
20. The line of action of the buoyant force acts through the. = Centroid of the displaced volume of fluid
21. A pressure of 25m of head of water is equal to. =245kN/m2
22. For a submerged body to be in stable equilibrium, the center of gravity should be. =Below the center of buoyancy.
23. The actual velocity at vena contracta for flow through an orifice from a reservoir of height H=?. =Cvv2gH
24. A body weighing 2kg in air weights 2.5kg when submerged in water. Its specific gravity is. = 6
25. In a free vortex motion: = each particle moves in a circular path with a speed varying inversely as the distance from the center.
26. A centrifugal pump has speed-1000rpm, Flow-1200l.p.m, Head-20m, Power-5H.P. If its speed is increased to 1500rpm, new flow will be.: = 1800l.p.m
27. Runaway speed of a hydraulic turbine is: = the speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open.
28. 10m of water column is equal to = 100kN/m2
29. M.I. of a circular area about an axis perpendicular to the area is: = pr4/2
30. A projectile is fired at an angle ? to the vertical. Its horizontal range will be maximum when ? is . =450
31. An elevator weighing 1000kg attains an upward velocity of 4m/sec in two seconds with uniform acceleration. The tension in the supporting cables will be = 1200kg.
32. A 13m ladder is placed against a smooth vertical wall with its lower end 5m from the wall. What should be the co-efficient of friction between ladder and floor so that it remains in equilibrium. = 0.21
33. A car is moving with a velocity of 60km/hr and possesses energy of 5×105 joules. The mass of the car will be. =3000kg.
34. If l is the span of a light suspension bridge whose each cable carries total weight (w) and the central diop is y, the horizontal pull at each support is: = wl/y OR
35. A beam of length l, having uniform load w kg/unit length is supported freely at the ends. The moments at mid span will be: = wl2/8.
36. A boiler shell 200cm dia and plate thickness 1.5cm is subjected to internal pressure of 1.5MN/m2, then the hoop stress will be. = 100N/m2
37. 100KW is to be transmitted by each of two separate shafts. A is turning at 250rpm and B at 300rpm. Which shaft must have greater diameter.: = B
38. Two identical leaf springs of spring constant k are arranged like cantilevers in parallel and attached at free end by a spring of spring constant k. The equivalent spring constant of combination is; = 1.5k.
39. Automobile steering gear is an example of: = lower pair.
40. The type of coupling used to join two shafts whose axes are neither in same straight line nor parallel, but intersect is. = Universal coupling.
41. To transmit power from one rotation shaft to another whose axes are neither parallel nor intersecting, use: = Spiral gear.
42. A gear having 100 teeth is fixed and another gear having 25 teeth revolves around it, the centre lines of both gears being joined by an arm. How many revolutions will be made by gear of 25 teeth for one revolution of arm. = 5 rev.
43. The secondary critical speed of a shaft occurs at: = twice the speed of primary critical speed.
44. Brittle coating technique is used for: = experimental stress analysis.
45. Factor of safety is the ratio of: = yield stress/working stress.
46. Type of gear used for non-intersection perpendicular shafts: = Hypoid gears.
47. Corrosion resistance of steel is increased by adding: = Chromium & Nickel
48. The product of Cupola is called: = cast iron
49. Brinell tester uses a hardness steel ball of size: = 10mm
50. Sintered and tungsten carbides can be machined by: = EDM
51. What kind of abrasive cut off wheel should be used to cut concrete, stone and masonry? =Diamond grit.
52. In break-even analysis, total cost consists of: = Fixed cost + Variable cost.
53. The amount deducted from the salary of workers towards employees provident fund is : =deposited in the account of worker with Provident Fund Commissioner.
54. PERT is: = event oriented technique
55. Bar charts are suitable for: = minor works.
56. on a PERT/CPM chart represents: = a significant event representing some mile-stone
57. Electron volt is the unit of : = Energy.
58. Seamless tubes are made by?
59. Reheating in gas turbine results in: = increase of work ratio and decrease of thermal efficiency.
60. Why DC current is not used in transformer?
61. What is the purpose of draft tube in hydraulic turbines: = to convert the kinetic energy into pressure energy.
62. A mass of 100kg is falling from a height of 1m and penetrates the sand to 1m. what is the resistance force of the sand?
63. Two cars travel in the same direction at 40km/hr at a regular distance. A car comes in the opposite direction at 60km/hr. It meets each car in a gap of 8 seconds. What is the distance between the two cars?
2. A perfect gas at 270C is heated at constant pressure till its volume is double. The final temperature is = 3270C
3. An engine operates between temperature of 9000K and T2 and another engine between T2 and 8000K. For both to do equal work, value of T2 will be. = 6500K
4. Internal energy of a substance depends on = Temperature
5. Work done in compressing 1kg of gas adiabatically from p1,V1,T1 to p2, V2, T2 is equal to = Cv(T2-T1)
6. The unit of entropy is = J/kg 0K
7. Indicated power of a 4-stroke engine is equal to = pLAN/2
8. Which of the following is not an internal combustion engine :
a) 2 stroke petrol engine b) 4 stroke petrol engine c) Diesel engine d) steam engine e) Gas turbine. = (d)
9. If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the:
a) exhaust will be smoky b) piston rings would stick into piston grooves c) exhaust temperature will be high d) engine starts overheating e) all of the above. = (e)
10. The spark plug gap is normally maintained at: = 0.45 to 0.6mm
11. A distributor in spark ignition engines performs the function of : = Providing the correct firing order in engine
12. Which of the following does not relate to C.I. engine:: a) fuel pump b) fuel injector c) governor d) carburetor e) flywheel = (d)
13. Air fuel ratio in a jet engine is = 60:1
14. What is the value of Prandtl No.?
15. In domestic refrigerator, the tubes at the back of the refrigerator are: a) evaporator b) condenser c) capillary tubes d)………
16. Which refrigerants has the highest critical point temperature. = Freon-11
17. Wet bulb temperature is. = indication of amount of moisture in air
18. On psychometric chart, dry bulb temperature lines are. = Vertical
19. Surface tension has the units. = newtons/m
20. The line of action of the buoyant force acts through the. = Centroid of the displaced volume of fluid
21. A pressure of 25m of head of water is equal to. =245kN/m2
22. For a submerged body to be in stable equilibrium, the center of gravity should be. =Below the center of buoyancy.
23. The actual velocity at vena contracta for flow through an orifice from a reservoir of height H=?. =Cvv2gH
24. A body weighing 2kg in air weights 2.5kg when submerged in water. Its specific gravity is. = 6
25. In a free vortex motion: = each particle moves in a circular path with a speed varying inversely as the distance from the center.
26. A centrifugal pump has speed-1000rpm, Flow-1200l.p.m, Head-20m, Power-5H.P. If its speed is increased to 1500rpm, new flow will be.: = 1800l.p.m
27. Runaway speed of a hydraulic turbine is: = the speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open.
28. 10m of water column is equal to = 100kN/m2
29. M.I. of a circular area about an axis perpendicular to the area is: = pr4/2
30. A projectile is fired at an angle ? to the vertical. Its horizontal range will be maximum when ? is . =450
31. An elevator weighing 1000kg attains an upward velocity of 4m/sec in two seconds with uniform acceleration. The tension in the supporting cables will be = 1200kg.
32. A 13m ladder is placed against a smooth vertical wall with its lower end 5m from the wall. What should be the co-efficient of friction between ladder and floor so that it remains in equilibrium. = 0.21
33. A car is moving with a velocity of 60km/hr and possesses energy of 5×105 joules. The mass of the car will be. =3000kg.
34. If l is the span of a light suspension bridge whose each cable carries total weight (w) and the central diop is y, the horizontal pull at each support is: = wl/y OR
35. A beam of length l, having uniform load w kg/unit length is supported freely at the ends. The moments at mid span will be: = wl2/8.
36. A boiler shell 200cm dia and plate thickness 1.5cm is subjected to internal pressure of 1.5MN/m2, then the hoop stress will be. = 100N/m2
37. 100KW is to be transmitted by each of two separate shafts. A is turning at 250rpm and B at 300rpm. Which shaft must have greater diameter.: = B
38. Two identical leaf springs of spring constant k are arranged like cantilevers in parallel and attached at free end by a spring of spring constant k. The equivalent spring constant of combination is; = 1.5k.
39. Automobile steering gear is an example of: = lower pair.
40. The type of coupling used to join two shafts whose axes are neither in same straight line nor parallel, but intersect is. = Universal coupling.
41. To transmit power from one rotation shaft to another whose axes are neither parallel nor intersecting, use: = Spiral gear.
42. A gear having 100 teeth is fixed and another gear having 25 teeth revolves around it, the centre lines of both gears being joined by an arm. How many revolutions will be made by gear of 25 teeth for one revolution of arm. = 5 rev.
43. The secondary critical speed of a shaft occurs at: = twice the speed of primary critical speed.
44. Brittle coating technique is used for: = experimental stress analysis.
45. Factor of safety is the ratio of: = yield stress/working stress.
46. Type of gear used for non-intersection perpendicular shafts: = Hypoid gears.
47. Corrosion resistance of steel is increased by adding: = Chromium & Nickel
48. The product of Cupola is called: = cast iron
49. Brinell tester uses a hardness steel ball of size: = 10mm
50. Sintered and tungsten carbides can be machined by: = EDM
51. What kind of abrasive cut off wheel should be used to cut concrete, stone and masonry? =Diamond grit.
52. In break-even analysis, total cost consists of: = Fixed cost + Variable cost.
53. The amount deducted from the salary of workers towards employees provident fund is : =deposited in the account of worker with Provident Fund Commissioner.
54. PERT is: = event oriented technique
55. Bar charts are suitable for: = minor works.
56. on a PERT/CPM chart represents: = a significant event representing some mile-stone
57. Electron volt is the unit of : = Energy.
58. Seamless tubes are made by?
59. Reheating in gas turbine results in: = increase of work ratio and decrease of thermal efficiency.
60. Why DC current is not used in transformer?
61. What is the purpose of draft tube in hydraulic turbines: = to convert the kinetic energy into pressure energy.
62. A mass of 100kg is falling from a height of 1m and penetrates the sand to 1m. what is the resistance force of the sand?
63. Two cars travel in the same direction at 40km/hr at a regular distance. A car comes in the opposite direction at 60km/hr. It meets each car in a gap of 8 seconds. What is the distance between the two cars?
Subscribe to:
Posts (Atom)